25
EN
• Operate your machine with cold water
only.
• Use only the new water inlet hoses
given with your machine or purchased
through authorized dealers.
• 1 gasket is included in the hose packaging to prevent water
leaks in connections. Fit this gasket to the end of new water inlet
hose on the side of faucet.
• Connect the white end of the water
inlet hose to the water entrance valve on
the back of the machine. Tighten plastic
parts on the hose using your hand.
• Connect the other end of the water inlet
hose to a 3/4” water tap with threads.
Tighten plastic parts on the hose using
your hand.
• In uncertain conditions, have the con
-
nection works done by a qualified plum
-
ber.
• Ensure that points of contact do not leak after you have made
the connections.
• Flow of water with pressure of 0.1-1 Mpa will allow your mac
-
hine to operate more efficiently (0.1 Mpa pressure means that
more than 8 litres of water will flow through a fully-opened faucet
per minute).
• Ensure that the new water inlet hoses are not bent, broken,
crushed or resized.
Water inlet connection
Summary of Contents for TK3 1490 WD
Page 2: ...2 EN EN...
Page 85: ...52142327...
