Teka TCD70, Instruction Manual

Page: 11 / 16

11 Instruction Manual
— Press the “Speed Dry” button.
— Press the “Start/Pause” button to begin the programme.
7.6 Signal Function
This function allows you to turn the audible tone on or off, to indicate that your drying
programme is complete. By default the audible signal is set to On.
When the Signal function is on, your appliance will make an audible tone when:
— The extra function buttons are pressed (i.e. Speed Dry, Anti-Crease, etc).
— If the dryer is operating and the programme selector knob is turned, the appliance will
make an audible tone to alert the user that an invalid choice has been made.
— At the completion of a drying programme, an audible tone will sound.
7.7 Anti-Crease Function
At the end of a drying programme, the anti-crease operation time is 30 minutes (by default)
or 120 minutes (if selected).
The “Anti-Crease” light shall illuminate when the function is selected. This function helps
to prevent the laundry from creases. The laundry can be removed during the anti-crease
phase. All programmes have the ability to use this function, except for Cool, Refresh and
Baby Care.
7.8 Child Lock
Your appliance features a child lock, preventing children from pressing keys or changing the
dryers operation.
To activate the child lock:
— When the appliance is in operation, press and hold the “Anti-Crease” and “Signal”
buttons simultaneously for 3 seconds. Once activated, the display will show the Child
Lock icon.
— Whilst the Child Lock is activated, pressing of buttons won’t effect the dryer.
— To deactivate the Child Lock, simply press and hold the “Anti-Crease” and “Signal”
buttons simultaneously for 3 seconds. The Child Lock indicator icon will switch off the
display.
8. Cleaning Proceedures
8.1 Lint Filter
As with all clothes dryers, your lint filter should be cleaned after each use.
Note:
— Lint accumulates on the lint filter and will block the air circulation. This effects the
performance of your clothes dryer and will extend the required drying time.
— Always disconnect the power cord before cleaning!
— Do not operate the dryer without the lint filter installed!
— Clean the lint filter after each use .
To clean the lint filter:
— Ensure the dryer has cooled down after any recent operation.
— Un-plug the appliance.
— Open the appliance door.
— Take out the lint filter and wipe off any accumulated lint and fibres with your hand, or rinse
the filter with water and dry thoroughly.
— Re-install the lint filter.
Cleaning
& Maintenance