Teka RVF 10032 GBK, User Manual

Page: 8 / 71

7
IMPORTANT SAFETY INSTRUCTIONS
 WARNING 
To reduce the risk of fire, electrical shock, or injury when using your
appliance, follow these basic precautions:
•
Read all instructions before using the wine chiller.
•
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still
dangerous.
•
Before you throw away your old wine chiller, take off the door but leave the shelves in place so that children
may not easily climb inside.
•
Never allow children to operate, play with, or crawl inside the appliance.
•
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
•
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before using your wine chiller
−
Remove the exterior and interior packing.
− Check to be sure you have all of the following parts:
o
shelves
o
Stainless Steel Handle
o
Instruction Manual
− Before connecting the Wine Chiller to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
− Clean the interior surface with lukewarm water using a soft cloth.
− Install the handle on the left side of the door.
Installation of your wine chiller
−
This appliance is designed to be for free standing installation or flush-in.
−
Place your wine chiller on a floor that is strong enough to support it when it is fully loaded. To level your wine
chiller, adjust the front leveling legs at the bottom of the wine chiller.
−
Locate the wine chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct