9
EN
0_00
the display.
3.
Select the cooking time by touching
or
. You will hear 2 beeps, the
remaining time will appear on the display
and the
symbol will flash.
4.
Press
to select the option.
5.
Press
or
until the
symbol on
the display starts flashing, then press
0_00
the display.
6.
Select the cooking end time by pressing
or
.
7.
The oven will remain disconnected with
the
and
symbols lit up. The oven
is now programed.
8.
When it is time to start cooking, the oven
will turn on and will operate for the
programed time.
9.
While cooking, the remaining cooking
time will be displayed and the
symbol
will flash.
10.
When the cooking time is up, the oven
will turn off, a buzzer will sound, and the
symbol will flash.
11.
Press any key to stop the buzzer and
turn off the
symbol. The oven will
switch on again.
12.
Set the controls to
position to turn off
the oven.
You can change the remaining cooking time
at any time by touching
or
until the
symbol starts to flash quickly. Press
to change the time.
MICROWAVE
1.
Select the microwave function.
2.
The display shows 00:30 (Quick start
function) by default. Press
or
until
the display shows 1:00.
3.
Press
to confirm.
4.
The display shows the default cooking
time. Select the desired cooking time by
pressing
or
.
5.
Press
to confirm.
6.
The display shows the default Power
setting. Select the desired power setting
by pressing
or
.
7.
Press
to confirm.
8.
Press
to start the microwave function
with the desired parameters.
QUICK START
1.
Select the microwave function.
2.
Press
and the microwave starts
immediately to operate in the Microwave
function at maximum power for 30
seconds.
3.
If you want to increase the operating time
press
again. Each time you press this
key the operating time will be increased
by 30 seconds.
DEFROST BY TIME
1.
Select the microwave function.
2.
Press
or
until the
symbol
appears on the display.
3.
Press
to select the option.
4.
The display shows the default defrost
time. Select the desired cooking time by
pressing
or
.
5.
Press
to start the defrost by time
function with the desired parameters.
Summary of Contents for MLC 844
Page 48: ...1632150 a ...
