Teka LSI5, User Manual

Page: 25 / 88

EN
25
l
Check that the tap is turned on and that
the discharge hose is positioned
correctly.
l
Press the START/PAUSE button (the
display will show the drying time
remaining).
l
When the programme is finished the word
"End" will appear on the display. After
5 minutes the appliance will go into
standby mode (on certain models, the
display will show two lines).
l
Switch off the machine by turning the
programme selector to the
OFF position.
l
Open the door and remove the laundry.
l
Turn off the tap.
CANCELLING THE DRYING PROGRAMME
l
To cancel the drying programme, press
and hold the
DRYING SELECTION
button for about 3 seconds .
In order to ensure the correct operation
of the appliance, it is advisable not to
interrupt the drying phase unless it is
absolutely necessary.
WARNING:
Do not dry woollen garments or
articles with special padding (e.g.
quilts, quilted anoraks, etc.) and very
delicate fabrics. If garments are
drip/dry, load less items as to prevent
creasing.
The appliance calculates the time to
the end of the selected programme
based upon a standard loading.
During the cycle, the appliance
corrects the time according to the size
and composition of the load.
During the drying phase the drum will
accelerate to a higher speed to
distribute the load and to optimize the
drying performance.
WARNING:
After cancelling the drying programme,
the cool down phase will begin and you
must wait for about 10/20 minutes
before opening the door.