Teka IR-720, Installation Instructions And Recommendations For Using And Maintaining

Page: 10 / 12

scourer with water or a special cleaner
for ceramic hot plates. Plastic objects,
sugar or food containing a lot of sugar
that have melted onto the surface must
be removed immediately using a scra-
per.
Metallic sheens are caused by
dragging metal pots and pans over the
glass. These can be removed by clea-
ning thoroughly using a special clea-
ner for ceramic glass hot plates,
although you may need to repeat the
cleaning process several times.
Warning:
Handle the glass scraper
carefully. The blade could cause
injury!
If you use the scraper inco-
rrectly, the blade could break and a
fragment could get caught between
the surrounding trim and the glass.
If this happens, do not try to remo-
ve it using your hands, carefully use
tweezers or a knife with a fine edge.
(See fig. 3)
Only use the blade on the
ceramic surface, avoiding the scra-
per casing coming into contact with
the glass because this could
scratch it.
Use blades in perfect condi-
tion. Immediately replace the blade
if it is damaged in any way.
After you have finished with
the scraper, withdraw the blade and
lock it. (See fig. 4)
A pot or pan may become
stuck to the glass due to a product
having melted between them. Do not
try to lift the pot while the heating
zone is cold! This could break the
glass.
Do not step on the glass or
lean on it as it could break and cau-
se injury. Do not use the glass as a
surface for placing objects.
TEKA INDUSTRIAL S.A. reserves the
right to make changes to its manuals
that it deems necessary or useful,
without affecting the product's essen-
tial features.
Environmental
considerations
The symbol on the product or
its packaging means that this pro-
duct cannot be treated like ordinary
household waste. This product
must be taken to a recycling collec-
tion point for electrical and electro-
nic appliances. By ensuring that
this product is disposed of
correctly, you will avoid harming the
environment and public health,
which could happen if this product
is not handled properly. For more
detailed information about recycling
this product, please contact your
local authority, household waste
service or the store where you pur-
chased the product.
The packaging materials used are
environmentally-friendly and can be
recycled completely. Plastic compo-
nents are marked >PE<, >LD<,
>EPS<, etc. Dispose of packaging
materials, like household waste, in
your local container.
If something does not work
Before calling the technical service,
perform the verifications described
below.
The appliance does not work:
Ensure that the power cable is plugged
in.
The induction zones do not produce
heat:
The container is not appropriate (it
does not have a ferromagnetic bottom
or is too small). Check that the bottom
of the container attracts a magnet, or
use a larger container.
A humming is heard when starting
to cook in the induction zones:
With containers which are not very thick
or not of one piece, the humming results
from the transmission of energy directly
to the bottom of the container. The hum-
ming is not a defect, but if you wish to
avoid it anyway, reduce the power level
slightly or use a container with a thicker
bottom, and/or of one piece.
The touch control does not light up
or, despite lighting, does not res-
pond:
No heating zone has been selected.
Be sure to select a heating zone befo-
re operating it.
There is humidity on the sensors,
and/or your fingers are wet. Keep the
touch control surface and/or your fin-
gers clean and dry.
The locking function is activated.
Unlock the controls.
The sound of a fan is heard while
cooking, which continues even after
cooking has ended:
The induction zones have a fan to
keep the electronics cool. This only
operates when the electronic circuits
get hot. It stops again when the circuits
cool whether the hob is turned on or
not.
The power indicator of a hotplate
alternates between ‘Power and ‘?’:
The induction system does not find a
pot or pan on a hotplate.
The pot or pan used is of an unsuited
type. Switch off the hob, switch it on
again and try with another pot or pan.
The power indicator of a hotplate
alternates between ‘H’ or ‘Power’
and ‘C’:
Excessive temperature in the electro-
nics or on the glass. Wait for a while for
the electronics to cool down or remove
the pot or pan so that the glass can
cool.
10
fig. 4
Blade protected Blade unprotected
Using the scraper
fig. 3