Maintenance VK60LB
Maintenance of Intra products in stainless steel
Congratulations on your purchase of an Intra product
that has been produced with care and to a high
quality. Many of our products are supplied with a
plastic film. This film protects the product during the
transport and has to be removed before use.
To keep the original quality of your Intra product in
AISI304 stainless steel, we recommend regular
cleaning. Use washing
up liquid and clean water to clean the product after
use. Rinse carefully and dry.
Don’t forget to clean all loose parts, e g the drain
grating.
Please have the following in mind
• Don’t let water or other liquids dry on the product.
In this way you avoid that a grey coating builds up on
the steel.
• Stainless steel can stand hard treatment but sharp
objects can easily scratch the surface. These scratches
are more visible
when the product is new. After a period of use these
marks will be smoothed out, without the product
loosing its lustre.
• Never use scouring powder or steel wool to clean
the surface. Apart from the risk of scratches, there is
also a risk that rust stains will attack the steel.
• Avoid Chlorine based solutions coming into contact
with the stainless steel.
• Silver polish leaves spots that cannot be
removed.
• Food-stuffs that contain acid or other substances
must quickly be removed (e.g. juices, salt, mustard,
mayonnaise).
Discoloration
More stubborn spots are often caused by impurities
in the water or household substances. These can be
removed with special polish agents for stainless steel.
We recommend the use of Intra Shining Kit. Dull
spots can become lustrous again if rubbed with chalk
on a soft cloth.
3
FDV Revision 20190429
www.intra-teka.com
