31
Installation & Maintenance
English
Safety for cleaning and maintenance
• Disconnect the appliance from the mains power supply be
-
fore any operation.
• Do not use steam cleaners or pressurised water to clean the
oven.
• Do not use metal scouring pads, wire brushes or commer
-
cially available or abrasive powder cleansers to clean the
oven door as they can scratch the surface and cause the
glass to break.
• Cleaning and maintenance tasks to be carried out by the
user should not be done by children without supervision.
• Before replacing a bulb, first make sure that the oven has
been disconnected from the mains to avoid the possibility of
receiving an electric shock.
• Remove all accessories and dishes from the oven, including
the shelf supports and/or telescopic runners.
• Clean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• For your safety, never operate the oven without the back
panel (that protects the fan) in place.
Safety when using the pyrolytic cleaning cycle
Before starting the cleaning cycle:
• CAUTION: Remove all accessories and dishes from the oven,
including the shelf supports and/or telescopic runners.
• Clean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• Remove any dirt from the oven gasket.
• Carefully follow the instructions for programming the pyro
-
lytic cleaning cycle.
