IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
DATE
5-3-18
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.tekaillumination.com • [email protected]
REFERENCE NUMBER
INS-2523-00
HIGH LIGHT WALL™ (HLW)
LED Replacement Instructions
2. Remove shade assembly from fixture body.
1. Loosen two (2) #8-32 set screws on shade
assembly using a 5/64” Allen wrench.
To Replace Components
4. Utilize quick disconnects to install new modular
LED and driver components. Place new LED
assembly and driver into fixture body.
3. Pull the heat sink from the body to expose
the LED board and Driver components.
Disconnect old LED assembly and driver via
quick disconnects.
6. Tighten two (2) #8-32 set screws on shade
assembly using a 5/64” Allen wrench.
5. Replace shade assembly on fixture body.
