Teka GFG2, Instruction Manual

Page: 16 / 100

16
EN

Do not allow grease to accumulate in any part of the extractor,
especially in the grease filters as this COULD PRODUCE A
FIRE RISK!

The grease filters and the internal part of the extractor must be
cleaned at least once a month depending on how often the
extractor is used. Note that grease is deposited in the extractor
when cooking, whether it is switched on or not.

We recommend the use of gloves and caution when cleaning the
inside of the extractor.
Repairs

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.

Do not switch on the extractor if the supply cord is worn or has
cuts or if there are signs of deterioration around the control
panel.

If the LED module is malfunctioning, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.

If the extractor stops working or functions abnormally, unplug it
from the mains and contact the technical service.
Description of the appliance (Fig. 1-3)
A Motor controls, three speeds:
Low
High
Intensive
B
Light
switch
independent from motor
commands
C
Lig
h
ting
by means of LED lamp
D Filter located over cooking area, easily
withdrawn for cleaning
E Frame and filter support
F Possibility of incorporating activated
charcoal filter (fig.2)
G-H Anti return tabs to be located in the outlet
mouth, locating their ends in the holes
provided (fig.2).
Instructions for use
By pressing the buttons (
“A”, “B”
) shown in
figure 1, you will be able to control the
functions of the extractor.
Two achieve better extraction, we recommend
switching on the extractor a few minutes
before starting to cook (3 - 5 minutes) so that
the air flow is continuous and stable when
extracting the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odours to be expelled.