User instructions
25
4. Troubleshooting
The dishwasher is equipped with a self-diagnostics system that is
capable of detecting and signalling a number of possible faults.
TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM
FAULT
DESCRIPTION
E1
The anti-flooding system (where present) has been tripped.
E2
The water level limitation system has tripped.
E3
The appliance cannot heat the water.
E4
The temperature sensor is disconnected.
E5
The appliance cannot take in the water.
E6
The appliance cannot drain the water from the tank.
E7
The dishwasher cannot measure the precise water quantity that has
been loaded.
E8
Problem on the water distribution system to the baskets.
E9
Water intake system malfunction
If an alarm situation occurs, the appliance interrupts the program in progress
and signals a fault.
•
Alarms E1, E2, E3, E4, E8 and E9 interrupt the current program
immediately.
•
Alarms E5 and E6 interrupt the current program; once the problem is
solved, the program will finish running.
•
Alarm E7 is displayed at the end of the cycle which is finished
regardless of the problem, as operation of the dishwasher is not
affected.
To reset an alarm:
•
open and close the door, or turn the machine off and on again. The
dishwasher can now be programmed again.
If the malfunction persists, contact your authorised Service Centre.
