18
Starting A
program
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Saving Energy
1.
Pre-rinsing of tableware items leads to increased water and energy consumption
and is not recommended.
2.
Washing tableware in a household dishwasher usually consumes less energy and
water in the use phase than hand dishwashing when the household dishwasher is
used according to the instructions.
A program can only be changed if it has been running only for a short period of
time, otherwise the detergent may have already been released or the wash water
with detergent has already been drained. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must be refilled.
program selection mode
To reset the dishwasher,
follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Press Program button more than three seconds the machine will be in
.
3.
You can change the program to the desired cycle setting.
Changing The Program Mid-cycle
3 sec
Summary of Contents for DSI 44700 SS
Page 1: ...www teka com User Manual DSI 44700 SS EN...
Page 51: ...www teka com...
