17
GB
16
GB
Index
Description of the appliance
Page 16
Instructions for use
16
Cleaning and maintenance
17
Technical Information
17
Installation
18
If something does not work
18
Description of the appliance
A
Light switch
B
Sliding three-speed motor switch
C
Motor “on” pilot light
D
Adjustable hood that allows larger
fume capture area
E
Filter body and supports
F
Filter support closures
G
Illumination by means of bulbs
H-I
Non-return flaps which are placed in
the outlet, locating their ends in the
openings provided.
Instructions for use
By means of the controls located on the
front of the hood, the desired speed can be
selected as well as the choice of lighting.
Two achieve better extraction, we recom-
mend switching on the extractor a few
minutes before starting to cook (3 - 5 min-
utes) so that the air flow is continuous
and stable when extracting the fumes.
Likewise, keep the extractor switched on
for a few minutes when cooking is com-
plete to allow all fumes and odours to be
expelled.
Cleaning and maintenance
Before carrying out any cleaning or mainte-
nance activities, ensure that the extractor
is disconnected from the mains.
To carr y out cleaning and maintenance,
follow the safety instructions indicated
on Page 15.
Filter cleaning
To withdraw the filters from their loca-
tions release the anchoring points. Clean
the filter, either by putting it in the dish-
washer (see notes) or leaving it standing
in hot water to simplify the removal of
grease or, if wished, by means of special
sprays (protecting the non metallic
parts). Once clean, leave it to dry.
Notes:
cleaning in the dishwasher with
aggressive detergents may blacken the
surface of metallic par ts, without this
affecting its gas retaining properties.
N.B.
The filter must be cleaned at least
once a month depending on how often
the extractor is used. It must be remem-
bered that grease is deposited in the
extractor when cooking, whether it is
switched on or not.
Cleaning of the extractor body
The use of warm (40ºC approx.) soapy
water is recommended. A cloth moistened
in this water is used for cleaning the extrac-
tor, paying special attention to the grids.
Afterwards, dry using a lint-free cloth.
Note:
Never use metallic scouring pads
or abrasive products that could damage
the surface.
Do not use scrapers with metallic sur-
faces such as knives, scissors etc.
Activated charcoal filter
To install the charcoal filter, disassemble
the lid, locate the filter in the position
provided and reassemble the lid.
The carbon filter lasts from three to six
months depending on the particular con-
ditions of use.
The activated carbon filter can neither be
washed nor regenerated. Once it is
exhausted, it must be changed.
To replace exhausted filters with new
ones, withdraw the old one in the reverse
order to that of installation.
Changing Bulbs
Remove the filter support to acces the bulbs.
Take care to disconnect the hood from
the mains beforehand and that the bulbs
to be replaced are not hot.
The maximum bulb power is 40 W.
Technical information
Dimensions
Width = 600 (760) (900) mm
Depth = 500 mm
Height = 150 mm
Electrical characteristics
REFER TO RATING PLATE
Mod.
Typ.
POTENCIA NOM. LAMPARAS
NENNLEISTUNG GLÜHLAMPEN
LAMPS RATE
PUISSANCE LAMPES
POTENCIA NOM. DAS LAMPADAS
2 x 4 0 W
XXX – ZZ
Z-000000
N.º de fábric.
Fabrik.-Nr.
Serial No.
Made in European Community - C.I.F.: A-39004932
AA-000000
ELECT.
0 0 0 … 0 0 0 V. ~
0 0 H z
0 0 0 W.
H
I
A
B
C
B
C
A
F
F
D
G
E
CLASSIC
Speed
0
Off
1
First speed
2
Second speed
3
Third speed (Max)
Light
0
Off
1
On
TUB
Speed
0
Off
1
First speed
2
Second speed
3
Third speed (Max)
Light
0
Off
1
On
392
392
500
600 / 760 / 900
150
Summary of Contents for Classic C-601
Page 1: ......
