For the correct conservation of the hob glass
it must be cleaned using the appropriate pro-
ducts and utensils and when the glass is
cold. Cleaning is easier if it is done each
time the hob is used, thus preventing the
build-up of dirt .
The cleaning of the hob glass will depend on
its degree of dirtiness:
•
When the hob is only slightly dirty and the
d i r t is not adhered, clean with a damp
cloth and mild detergent.
•
Stains or grease should be removed using
cleaning products suitable for glass (cera-
mic cleaners).
•
When dir t is strongly adhered or burn t - o n ,
it should be removed by scraping with a
razor blade.
•
If plastic objects/utensils or sugar has
melted on the sur face of the glass, these
should be scraped off immediately, before
the glass cools off.
•
Under no circumstances should aggressive
or abrasive cleaning products, such as
oven cleaners, deoxidizing stain re m o v e r s ,
sponges with hard sur faces or scoure r s ,
be used.
•
Do not slide pans across the glass. This
may cause scratching.
•
Take care to prevent pans from boiling dr y.
The heat accumulated in the bottom of the
pan could cause damage to the burner or
to the hob glass.
•
The hob glass will withstand light blows by
large pans which do not have sharp edges.
C a re should be taken to avoid impacts by
small sharp utensils. Do not strike the
edge of the glass with pans as this may
cause irreparable damage.
•
Do not spill cold liquids on the glass or the
burners when they are hot.
•
Do not stand or lean on the glass. It may
break and cause injur y.
Cleaning and conservation of other elements:
•
Pan suppor ts should be cleaned with a
non-abrasive scourer after they have coo-
led off.
•
B u rners must be cleaned periodically, par-
ticularly the grooves in the burner heads.
This is achieved by soaking in warm soapy
water and scrubbing with a scourer or a
stiff brush.
•
Do not clean the enamelled burner covers
when they are still hot. Damage can be
caused by abrasive products, such as vine-
gar, coffee, milk, salt water and tomato jui-
ce, as a result of prolonged contact with
the enamelled surfaces.
•
Stainless steel must be washed with
soapy water and a soft cloth. If the surface
continues to be yellow after washing we
recommend the use of lemon, vinegar, dilu-
ted bleach or a cleaning product which con-
tains bleach. The shine of stainless steel
is maintained by lightly buffing with a
metal polish.
•
The control panel should be cleaned with
soapy water and a soft cloth.
•
When the burners have been dismantled
for cleaning purposes, care should be
taken to prevent liquids or other objects
from entering the nozzle unit.
•
Do not use cleaning products which are
a g g ressive to aluminium, such as caustic
soda, oil, etc.
•
Each time you assemble a burn e r, check
that all of its component par ts fit together
c o rre c t l y. A badly positioned element may
cause the hob glass to overheat.
31
Cleaning and Conservation
61401134/329 ingles 18/7/03 16:57 Página 31
