BA_AirFan_161122_GB.doc
3
22.11.2016
2. Preface
Congratulations on purchasing the unit from the TEKA-series “AirFan”.
Our engineers ensure that our filter systems reflect the state of the art through continuous devel-
opment. Nevertheless, misuse or misconduct can endanger your safety.
Please observe the following for a successful use of the filter system:
Please read these instructions before operating the system, and observe the safety pre-
cautions to avoid injury!
Improper use of the equipment can cause serious injury or death!
Store this manual in a safe place! These instructions are to be regarded as a compo-
nent of the product!
Adhere to all product notes!
Observe the local regulations in force at the installation site!
Observe the manufacturer’s instructions. Contact the manufacturer in case of any un-
certainty.
Tel.:
+49 28 63 - 92 82 - 0
Fax:
+49 28 63 - 92 82 - 72
We thank you for your confidence in us and wish you every success.
3. Intended use
The TEKA – Extractor blower filter unit is primarily used for localised extraction of welding fumes. For
this purpose, the unit can be equipped with one flexible extractor hose or application-specific fittings.
Improper use of the equipment can lead to damage to individual parts and endan-
ger life and limb!
The system must
not
be used for the extraction of oil containing welding smoke, explo-
sive dusts and gases, metallic dust, hybrid mixtures, burning or glowing substances, gas-
es, water, etc. The system must also not be operated in explosive zones.
Please contact the manufacturer in case of doubt!
The polluted air is sucked into the extractor hood (or application-specific fitting) and transported outside
through the extractor hose.
