2
4
5
3
3
Step 1:
Insert the two dowels (6) into
the holes on the pony’s (1)
side, lining up the holes on
the dowels with the holes on
the pony. Screw in all four
dowel screws (9).
Starting with the front dowel
add the stirrup (7), then the
elastic band (8). Secure in
place using elastic band
screws (10). Repeat for other
side of dowel.
On the rear dowel (6) place
the elastic band (8) on the
end and secure in place using
elastic band screw (10).
Repeat for other side.
Step 2:
Slip the elastic band (8) over
the pegs on the frame ends
(2). Repeat for all four elastic
bands.
Step 4:
To create the bouncer and rocker base,
have the frame side (3) legs faced up with
the smooth side facing outward. Connect
the frame ends (2) to the frame sides (3) by
sliding in and then going down until you
hear a “click” sound. Repeat on opposite
end.
Step 5:
To create the spring horse base, have the frame
side (3) legs faced down with the smooth side
facing outward. Connect the frame ends (2) to
the frame sides (3) by sliding in and then going
down until you hear a “click” sound. Repeat on
oppsite end.
Step 3:
To attach the safety seat (4), insert the front
piece into the back of the pony’s (1) neck
and secure with the safety seat screw (5).
(2)
(4)
(5)
(2)
(3)
(2)
(3)
1
2