TeichTip SUNSUN CBF-500 Operation Manual Download Page 3

 

© by WilTec Wildanger Technik GmbH  

Item 50167 

Page 3 

 

http://www.WilTec.de

 

http://www.aoyue.eu 

  

09 2021

-1

 

http://www.teichtip.de

 

 

Introduction

 

 
Thank you for purchasing this quality product.

 To minimize the risk of injury we urge that our clients 

take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.

 

Keep these operation instructions safe. 
 
 

Safety instructions

 

 

 ATTENTION: 

The  device  is  not  intended  for  use  by  persons  (including  children)  with  impaired  or  limited  physical, 
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised by 
a person responsible for their safety or you follow the instructions made by this person how to use the 
device correctly. Children should be supervised to make sure they do not play with the device 

 

 ATTENTION: 

 

Run  a  visual  inspection  of  the  device  before  every  use.  Do  not  use  the  device  if  the  safety 
appliances are damaged or worn out. Never override safety regulations. 

 

Only use the device according to the intended purpose stated in the instructions for use. 

 

You are responsible for the safety of the working environment. 

 

The device cannot be installed in the drinking water circuit. 

 

The device can only be installed out of the water. 

 

It must be ensured that the device cannot fall into the water. 

 

Place the device so that it is not exposed to direct sun light. 

 

The universal hose connectors (stepped hose tails) can be shortened if necessary to match the 
hose diameter. 

 

Apply/mount hoses with hose clamps. 

 

 WARNING: 

Read carefully all the safety guidelines and the instructions.

 

Keep the instructions and the safety guidelines in a safe place in case you need them in the future. 
 
 

Wear resistance

 

 

 

The temperature of the liquid transported should not 35 

 in permanent operation. 

 

The filter is exclusively designed and intended for filtering garden ponds. 

 

The filter is not suitable for filtrating water whose temperature exceeds 40 

 or falls below 8 

 

Do not use in combination with oil, petrol or lubricant. The filter is not frost-resistant! Therefore, 
it is recommended not to use the filter in winter! 

 

The filter cannot be used under water. 

 

The filter must be placed at least 2 m away from the pond edge. 

 

 

Summary of Contents for SUNSUN CBF-500









Reviews: