visio
nano
Duct inspection system
page 16
operating instructions
Format and delete media:
1. In configuration mode, use the arrows to select System Setting (green icon).
2. Press OK to call up the list of configuration icons.
3. Use the arrows to highlight the FORMAT icon (blue).
4. Press OK to open the FORMAT selection screen (YES, NO).
5. Use the arrows to highlight the desired response.
6. Press OK to accept the selection and exit.
Reset the factory default setting:
1. In configuration mode, use the arrows to select System Setting (green icon).
2. Press OK to call up the list of configuration icons.
3. Use the arrows to highlight the DEFAULT icon (red).
4. Press OK to open the DEFAULT selection screen (YES, NO).
5. Use the arrows to highlight the desired response.
6. Press OK to accept the selection and exit.
View version:
1. In configuration mode, use the arrows to select System Setting (green icon).
2. Press OK to open the list of SYSTEM icons.
3. Use the arrows to highlight the VERSION icon (green).
4. Press OK to see the version.
5. Press OK again to exit.
