9
Filling the water tank
Which water should I use?
• Your appliance was designed to operate using untreated
tap water.
• Do not use pure demineralised or pure distilled water,
water from clothes dryers, scented or softened water, or
water containing additives (starch, perfume, aromatic
substances, softeners, etc.), rain water, filtered, bottled
or boiled water, water from refrigerators, batteries or
air conditioners. These types of water contain organic
waste, mineral elements that become concentrated
when heated and cause spitting, brown staining, leaking
or premature wear on your iron.
• Unplug the iron before filling it.
• Set the steam control to
.
• Lift the iron and, holding it at a slight incline, point the
soleplate up.
• Open the water tank cover.
• Fill the water tank to the mark “Max”.
• Close the water tank cover.
Max.
If your water is very hard (above 30°f or 17°dH or 21°e)
mix 50% untreated tap water with 50% distilled water
(available in hardware stores).
Depending on model
*
PREPARATION
*
Summary of Contents for Ultimate Pure
Page 1: ...EN www tefal co uk Ultimate Pure...
Page 3: ...3 EN Depending on model...
