TEFAL SelectGrill GC740, Instructions For Use Manual

Page: 24 / 100

24
Comments
20-21-22 If you want to cook food to different
personal tastes, open the grill and remove the
food when it has reached the desired level
and then close the grill and continue cooking
the other food. The program will continue its
cooking cycle until it reaches the ‘well done’
level.
23 Keep warm function
The appliance will automatically go on the
keep warm setting after having reached the
“well done” level. If food is left on the grill it will
continue to cook, while the cooking plates
are cooling.
Comment: the safety system will turn the
appliance off automatically after a certain
amount of time.
Second cooking
20 21
22 23
Cooking more food
If you want to cook a second batch of food, please pre-heat the appliance again (starting from point 9 in automatic
mode or point 25) even if you want to cook the same type of food.
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even if you decide to pick the same cooking
mode than for the previous batch of food).
3. Press “OK” to validate your choice.
4. Select the cooking level
5. Press the “OK” button to start preheating. The preheat indicator (therm bar graph) flashes throughout the
preheating phase.You must wait until the thermometer and 3 lines stop flashing, and the food indicator is displayed,
before opening the grill and adding food to it.Wait a few minutes .This step is mandatory even if the device seems hot.
6. When the preheating is complete, a beep sounds, the thermometer and 3 lines stop flashing, and the food indicator is
displayed. The thermometer remains on during cooking to indicate that the appliance is heating up.
7. After the preheating, the appliance is ready for use. Open the grill and place the food inside the appliance.
Important:
-
Please note that any new batch of food, the pre-heating phase is mandatory.
Remember to always have the grill closed and no food inside in order for the preheating to effectively function.
-
Then wait for the pre-heating to be complete before opening the grill and place the food inside.
N.B.: if the new pre-heating cycle is carried out immediately after the end of the preceding cycle, the pre-heating
time will be reduced.