TEFAL PRESSING COMPACT GV5010CH, Manual

Page: 19 / 98

13
FR
EN
DE
NL
EL
IT
ES
PT
DA
SV
NO
FI
Storing the generator
• Turn off at the main switch and unplug.
• Wind the electric cord around the cord tidy
(10) - fig.4 . .
• Place the iron on the rest.
• Storing the steam cord
(8) - fig.5 .
• Leave the steam generator to cool down before putting it away if it
is stored in a cupboard or confined space.
• You can store your steam generator in complete safety.
Maintenance and cleaning
Before cleaning, ensure that your steam generator is unplugged and that the soleplate and the
iron rest have cooled down.
Do not use detergent or descaling products for cleaning the soleplate or the base unit.
Never hold the iron or the base unit under the tap.
Cleaning the soleplate
• Regularly clean the soleplate with a non-metallic sponge.
Cleaning the unit
• Clean the plastic parts of the appliance occasionally with a soft dam-
pened cloth.
Rinsing the boiler (once a month)
• Be careful : To extend the life of your boiler and to avoid the
build-up of scale, it is essential that you rinse out the boiler at least
after every 10 uses (approximately once a month).
• Check that the generator is cold and unplugged for more than
2 hours.
• Slowly unscrew the boiler cap.
• Using a jug, fill the boiler 3/4 full with untreated tap water
- fig.6 .
• Shake the base unit for a few moments and then empty it
completely into your sink - fig.7 .
• To obtain the best results, we advise you to repeat this operation.
A problem with your generator ?
Never place the iron on a
metal rest as this could
damage it.
Place it on the iron-rest on
the base unit : it has non-
slip pads and has been
designed to withstand
high temperatures.
PROBLEMS CAUSES SOLUTIONS
The generator does
not come on and
the thermostat light
is not illuminated. The appliance is not switched on. Check that your appliance is correctly
plugged in
Water runs out of
the holes in the
soleplate. Water has condensed in the
pipes because you are using
steam for the first time or you have
not used it for some time. Press on the steam control button
away from your ironing board until
the iron produces steam.
The soleplate is not hot enough. Wait for the thermostat light to go out
before activating the steam button.
Your thermostat is faulty: the iron is
not hot enough. Contact an Approved Service Centre.
If your water is hard,
increase the frequency.
In particular, do not use
descaling agents for
rinsing out the boiler, as
they could damage it.
1800128430_01 _GV5010E0_110x154 30/11/12 11:54 Page13