TEFAL OPTIGRILL GC702D, Instructions For Use Manual

Page: 10 / 18

10
19 - 20 When the colour corresponding to
your choice of cooking level appears,
open the appliance and remove your
food.
3
Cooking
21
20
19
21 Close the appliance.
The control panel will light up and set itself to 'choice of program' mode..
Comment: the security system will turn off automatically if no program
selection is made.
Cooking more food
If you want to cook a second batch of food, please pre-heat the appliance
again (see section 2. Pre-heating, starting from point 9) even if you want
to cook the same type of food.
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary
even if you decide to pick the same cooking mode than for the previous
batch of food).
3. Press the “OK” button: the appliance starts pre-heating. The pre-heating
is symbolized by the cooking level indicator that flashes purple.
4. The pre-heating is complete when an audible beep is heard and the
cooking level indicator stops flashing purple.
5. After the pre-heating, the appliance is ready for use. Open the grill and
place the food inside the appliance.
Important:
Please note that any new batch of food, the pre-heating phase is
mandatory.
Remember to always have the grill closed and no food inside in order for
the pre-heating to effectively function.
- Then wait for the pre-heating to be complete before opening the grill
and place the food inside.
N.B.: if the new pre-heating cycle is carried out immediately after the end
of the preceding cycle, the pre-heating time will be reduced.
TE_OPTIGRILL_2100092381 29/07/15 14:00 Page10