TEFAL HANDMIXER PREP LINE, Manual

Page: 13 / 122

12
- You can also increase the speed by pressing the
turbo button (A3) : this function can be used at
all speeds. We recommend that it is only used
briefly (a maximum of 30 seconds for thick
consistent doughs).
• After finishing, set the speed control (A2) to “ 0 ”.
• Disconnect and press the unlock button (J) to
raise the hinged arm. Then press the mixer unlock
button
(K) to remove the mixer from its stand.
• Then press the ejection button
(A1)
to remove
the beaters or kneaders.
Blender function (according to model)
• Check that the speed control (A2) is set to “ 0 ”.
• Remove the panel at the back of the appliance
and screw the Blender rod (
N
) anti-clockwise onto
the Motor Unit ( A ), without forcing it, until the
red dots are aligned. You will hear a small click
when the red dots match up indicating that the
rod is correctly positioned
(fig.3)
.
• Connect the appliance:
- Dip the Mixer rod in the preparation before
starting to avoid splashing.
- Start using the speed selector (A2) ,
(fig.2)
,
initially at speed 1 then 2,3,4,5 . Use the “ Turbo ”
setting (A3) if the recipe requires more power.
- Stop the appliance before removing from the
Blender rod (to avoid splashes).
Stopping and Disconnecting the Blender rod
• Select setting " 0 ", disconnect the appliance and
unscrew the Blender rod (N) by turning clockwise.
Do not use the Blender rod:
• In a saucepan on the hob
• Do not use it empty or with ice cubes, sugar, hard
spices, to mince raw meat, dry fruit (almonds,
hazelnuts, etc.)
EN
If you feel
resistance when
tightening the rod it
is not properly
aligned. You should
remove it comple-
tely and re-screw
correctly.
SM_MIXER_PREPLINE_EO_2550865-02_2550865-02 09/12/10 16:22 Page12