background image

7

that are under pressure, must not be opened during use.

• The appliance must not be used if it has been dropped, 

if it has any visible damage, if it leaks, or if it functions 

abnormally in any way. Do not attempt to dismantle 

your appliance: have it examined at an Approved Service 

Centre to avoid any danger.

• Check the electrical power cord and steam cords for signs 

of wear or damage prior to use. If the electrical power 

cord or the steam cord is damaged, it must be replaced by 

an Approved Service Center to avoid any danger.

•  Accessories, consumables and end user replaceable parts must be only 

purchased from an Approved Service Centre.

•  For your safety, this appliance conforms to all applicable regulations (Low 

Voltage Directive, Electromagnetic Compatibility, Environment, etc).

•  Your steam generator iron is an electrical appliance: it must be used under 

normal conditions of use. It is designed for domestic use only.

•  It is equipped with 2 safety systems:

 

–a pressure release valve designed to avoid excessive pressure. In the event 

of malfunction, the valve releases excess steam.

 

–a thermal fuse to avoid overheating.

•  Always plug your steam generator iron:

 

–into a mains circuit with voltage between 220 V and 240 V (Alternating 

current only),

 

–a socket outlet with an earth connection.

Connecting to the wrong voltage may cause irreparable damage to the 

appliance and will invalidate your guarantee.

•  Do not use an extension lead. If you accept liability for doing so, only use 

an extension lead which is in good condition, has a plug with an earth 

connection and is suited to the power rating of the appliance.

•  Completely unwind the power cord before plugging into an earthed 

socket outlet.

Summary of Contents for Express Protect SV92








































Reviews: