If the bottom of the bowl has traces of white lime scale:
• Pour a ladle of white vinegar (about 100 ml) into the bowl and leave for 1 hour.
• Then empty the bowl and rinse all parts with clear water.
Foods have stuck to the bottom of the bowl, what can I do?
• Soak for 1 hour (water + washing-up liquid).
• Remove the deposit with a spatula or wooden spoon.
• After emptying the bowl, rub the bottom of the bowl with the abrasive side of the sponge.
• If traces remain, use a steel wool.
You can use lemon juice, white vinegar or a dishwasher tablet dissolved in water (let it work for
the necessary time).
The overflow sensor has triggered the safety, there are 2 possibilities:
1) The liquid quantity is higher than the maximum level. In this case, reduce the amount of
ingredients.
2) The sensor is dirty, it is necessary to clean it before restarting the program.
My blender releases steam between the bowl and the engine block, is that normal?
This phenomenon is normal, the steam is released between the engine block which is waterproof
and the bowl so that the assembly does not build up pressure.
Sometimes a few drops may form on the work surface due to condensation.
I have opened the device during an automatic program, what do you recommend?
If you have opened the device during the cooking process for a soup recipe, for example, it is
imperative to check that there is enough water left.
Complete if necessary, close the device and restart the automatic program.
If you have opened the device during mixing and the result is not satisfactory, close the device
and run a "Smoothie" program.
My device makes a high-pitched noise in mixing mode.
This is a temporary phenomenon, which has no effect on the lifetime of your device. It will fade
or disappear after some use and cleaning (see "Cleaning the appliance").
