14
Change the microfilter* (ref: RS-RT9659)
Your vaccum cleaner is fitted with a paper bag, change the RS-RT9659 microfilter* every 6th bag change.
Open the lid (9) of your vacuum cleaner –
fig. 14
.
Remove the motor protection grid (12) -
fig. 17a
.
Remove the microfilter* (13) -
fig.17b
, and keep the motor protection grid (12).
Throw the microfilter* (13) in the bin -
fig. 17c
.
Place a new microfilter * (13) on the motor protection grid (12) -
fig. 17d
.
Place the pins in the notches -
fig. 17d
.
Lock the motor protection grid (12) -
fig. 17e
.
Make sure the motor protection grid (12) is properly in position before closing the lid (9).
Change the HEPA* filter cassette (ref: RS-RT900036) suitable for paper bags
and wonderbag compact
Important: Replace the HEPA filter cassette* RS-RT900036 every 6 months (depending on the frequency of
use).
Open the lid (9) of your vacuum cleaner –
fig. 14
.
Remove the HEPA filter cassette* (14a) –
fig. 18a – 18b
.
Throw the cassette into the dustbin –
fig. 18c
.
Place the pins for the new HEPA filter cassette in the notches -
fig. 18d
.
Lock the new HEPA filter cassette* (14a) in its housing – fig. 18e.
Make sure the HEPA filter cassette* (14a) is properly in position before closing the lid (9).
Clean the HEPA* filter cassette (ref: RS-RT900034) suitable for textile bags
Please note! This cleaning operation is reserved exclusively for the HEPA filter cassette * ref: RS-RT900034.
Open the lid (9) of your vacuum cleaner –
fig. 14
.
Remove the HEPA filter cassette* (14b) –
fig. 19a – 19b
.
Tap the HEPA filter cassette* (14b) over a dustbin –
fig. 19c
.
Then hold it under running water –
fig. 19d
, and allow to dry at least 24 hours –
fig 19e
.
Ensure that the HEPA filter cassette * (14b) is completely dry before replacing it.
Place the pins in the notches –
fig. 19f
.
Lock the HEPA filter cassette* (14b) in its housing –
fig. 19g
.
Make sure the HEPA filter cassette* (14b) is properly in position before closing the lid (9).
Cleaning the vacuum cleaner
Wipe the body of the vacuum cleaner and accessories with a soft damp cloth, then dry.
Wipe the lid with a dry cloth –
fig. 20
.
Do not use detergents or any corrosive or abrasive products.
Important: As soon as your vacuum cleaner stops performing efficiently, and before making any checks, stop
it by pressing on the On/Off pedal.
If your vacuum cleaner does not start
The appliance is not powered: make sure the appliance is properly connected.
If your vacuum cleaner does not suck
An accessory or the hose is blocked: unblock the accessory or hose.
The lid is not properly closed: check the position of the bag and bag support (15) and close the lid.
6. TROUBLESHOOTING
* According to model: these systems are specific to certain models or are accessories available as an option.
TE_ASPIRATEUR_COMPACTEO_ERGO_903081-01_903081 03/05/12 16:09 Page14