English
DESCRIPTION
1- Auto-Stop safety warning (depending on model)
2- Spray Button
3- Shot of steam Button
4- Steam control
5- Anti-calc valve
6- Spray
7- Soleplate
8- Thermostat control
9- Thermostat indicator light
10- Integral anti-scale system
11- Water tank filler hole
12- Extra large heel with non-slip pad
13- Electric power cord and cord support
14- Ergonomic grip
What water to use ?
Your appliance has been designed to function with untreated tap water. However, it is necessary to operate the Self-Clean func-
tion regularly in order to eliminate hard water deposits from the steam chamber.
If your water is very hard (check with your local water authority), it is possible to mix tap water with store-bought distilled or
demineralised water in the following proportions : - 50% untreated tap water, - 50% distilled or demineralised water.
Types of water not to use
Heat concentrates the elements contained in water during evaporation.The types of water listed below contain organic waste
or mineral elements that can cause spitting, brown staining, or premature wear of the appliance: water from clothes dryers,
scented or softened water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised water or rain
water should not be used in your Tefal iron. Also do not use boiled, filtered or bottled water.
Warning!
Before using your iron with the steam function for the first time, we recommend that you operate it in a horizontal
position for a few moments, away from your linen, i.e. press the Shot of Steam button a few times.
During the first few uses, a harmless odour and smoke may be given off.
This has no effect on the use of the iron and will disappear quickly.
Warning ! Remove any labels from the soleplate before heating up the iron
(depending on model).
1- STEAM IRONING
- Unplug your iron before filling it.
- Set the steam control to DRY (A).
- Take the iron in one hand and hold it with the point of the soleplate tilted downwards.
- To open the water tank stopper, turn it anticlockwise until the arrow on the stopper points to the “open padlock” symbol (B).
It will lift automatically.
- Fill the tank up to the “MAX” line (D).
- Re-close the tank stopper (C).To close the stopper, align the arrow with the “open padlock” symbol then turn it clockwise until the
arrow is aligned with the “closed padlock” symbol.
- You can now plug in your iron.
Filling the water tank
- In order to avoid water dripping from the iron onto the linen:
• Turn off the steam when ironing silk or synthetic fabrics.
• Set it at the minimum position for wool.
Setting the steam level
Setting the temperature
- Set the thermostat control (E) referring to the table below.
- The thermostat light comes on. It will go out when the soleplate is hot enough (F).
ENG
Summary of Contents for AQUATURBO
Page 2: ......
