TECHNICAL
SPECIFICATIONS
Electrical details
• Power and voltage are indicated
on the appliance.
• Fixed cord.
If the power supply cord is dama-
ged, it must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
for a few hours before cleaning it
with a sponge and washing-up
liquid (not scouring powder).
• NEVER IMMERSE THE
APPLIANCE WITH HEATING
ELEMENT AND CORD IN
WATER.
ASSEMBLY OF THE APPLIANCE
N.B. : Please use the pictures at the beginning of the
instructions to guide you.
1. If your appliance comes complete with :
a. support legs only (according to model) : place them
inside the legs integrated in the body of the appliance.
b. support legs with leg frame (according to model) : see
pictures of assembly situated at the beginning of the
instructions.
N.B. : the pushed-in part of the leg, situated at the
fixing whole level, must be directed into the side of the
leg mounting.
2. Place reflector inside the body of the appliance : the curved
side of the reflector must be placed forward.
3. Place the heating element on the back side of the reflec-
tor then insert properly the board in its place so that the
security system is operational. Then place the grid on the
appliance.
4. For AMIGO model :
a. If your appliance does not come complete with
handles (according to model) : place the grid on the
appliance, inside lateral notches (3 different heights).
b. If your appliance comes complete with handles
(according to model) : insert them in hooks situated on
each side of the grid then place the grid on the
appliance (3 different heights).
5. If your appliance comes complete with a splatter guard
(according to model) : place it on the grid inserting
notches into the bars of the grid.
USE INSTRUCTIONS
• Check that the voltage indicated
on the base of the appliance is
the same as your mains.
• To avoid overheating of your
appliance, we recommend you
do not place it in a corner or
against a wall.
• Pour 1,5 l. water maximum into
the reflector so that the
appliance works adequatly and
check there is always water when
using the appliance.
For AMIGO model : if the water
level is below 0,6 l., the appliance
stops heating for safety reason.
N.B. : When you add water during
cooking, do not pour it over the
heating element.
• Switch on at the mains.
When using an extension cable,
secure that it is safely concealed
so that people do not trip over it.
• If your appliance comes complete
with an On/Off switch, switch it
on.
• If your appliance comes complete
with a thermostat, position it on
Max.
After pre-heating, turn it to the
position of your choice.
• Pre-heating : 10-15 minutes.
• On first use it is normal for the
heating element to give off a
small amount of smoke and
odour.
SAFETY WARNINGS
• The appliance should be switched off at the mains when
not in use.
• Before each use, unwind the flex completely.
• Supply the appliance through a residual current device
(RCD) having a tripping current not exceeding 30 mA.
• The appliance is to be connected to a socket-outlet having
an earthing contact.
• Use only one appliance per plug and always use an earthed
extension cable, with cross section of at least 1 mm
2
.
• The supply cord should be regularly examined for signs of
damage and the appliance is not to be used if the cord is
damaged.
• Never touch metallic parts while the appliance is on as
they can become very hot.
• Before switching off at the mains, turn the thermostat to
the “0” position or switch to Off (on selected models only).
• Place the appliance on a firm table : avoid using it on a
soft base.
• Never place your appliance directly on a fragile surface
(glass table, tablecloth, piece of furniture).
• Do not place anything between the grid and the food
(e.g. a dish, aluminium foil...).
• Do not place cooking utensils to heat on the barbecue.
• WARNING : do not use charcoal or any other combustible
material with this appliance.
• Never leave your appliance in use without supervision.
• Do not cook food in tinfoil.
CLEANING
• Unplug and wait until the heating element is cold.
• Clean the base with a sponge in hot water and washing
up liquid. Do not put in the dishwasher !
• Do not use scouring powder.
• The heating element does not require cleaning, but when
cold it can be rubbed with a dry cloth to remove any food
deposits.
• For the grid use a brush and usual washing-up liquid.
• For the reflector clean it in a dish washer, or leave it to soak
TEFAL SA has an ongoing policy of research
and development and may modify these pro-
ducts without prior notice.
ENG
Summary of Contents for 392240
Page 2: ......
Page 6: ...Pyc 1 a 2 3 4 a 3 3 5 OBO CTBA K 1 5 0 6 10 15 30 B 1 mm2 0...
Page 7: ......