background image

Owner’s manual

6

EN

BEFORE FIRST USE

water and allow to air dry. Never submerge the device motor unit in water or any other liquid.

ASSEMBLY

1.  Assemble the bowl to the motor unit. 

Make sure to properly assemble the bowl.

Pay attention to the markings on the motor unit and the bowl: align the spot on the 

bowl with the open padlock on the base, twist clockwise to lock.

2.  Assemble the strainer to the bowl.

Align the bottom bulge of the strainer with the bottom grooves of the bowl, until 

3.  Place the auger in the center of the bowl.

Place the auger at the center hole of the bowl and rotate it until it can not move.

4.  Place the food chute lid onto the bowl. 

Pay attention to the markings on the bowl and the food chute lid: align the spot on 

the lid with the open padlock on the bowl, twist clockwise to lock.

NOTE

: If the device has not been correctly assembled or the food chute lid is not completely 

locked onto the bowl, the device will NOT start.

USING THE SLOW JUICER

1.  Once  all  parts  have  been  properly  assembled,  connect  the  device  to  power  supply 

socket.

2.  Place the juice and pulp containers under the ejectors.

3.  Food preparation:

When  extracting  ingredients  like  carrots  or  beets,  extract  with  a  combination 

Summary of Contents for TSA3228




















Reviews: