EN
Owner’s manual
10
CLEANING
• Always unplug the appliance before cleaning.
• Do not immerse the base in water or any other liquid.
• Wipe the housing base down with a damp cloth, then dry it.
• Wash the food chute and cones in warm, running water, then dry it.
• Be careful while handling the cones - their blades are extremely sharp.
• Should the plastic parts become stained with food (such as carrots), rub them with a
cloth dipped in a cooking oil and then clean as usual.
STORAGE
• After use, remove all cones from the food chute.
• Clean the device after each use. Make sure the appliance is dry before storing it.
TROUBLESHOOTING
Problem
Solution
Food is not sliced or
shredded uniformly.
This may be caused by placing too much food into the food chute, or pressing
too hard on the pusher.
Appliance will not
turn on.
1. Check if the mains supply functions correctly.
2. Unplug the appliance and let it rest for approximately 4 minutes. Plug it
back in, and press On. If the appliance still does not respond, contact with an
authorized service point.
Food is not
processed at all, or
very thoroughly.
1. Cheese
Cheese is easier shredded when chilled, and processed immediately after
being removed from the refrigerator. Softer cheeses, like Mozzarella, should
be placed in the freezer for 30 minutes before processing.
2. Fruits and vegetables
Fruits and vegetables are easier to process when are firm, and not overly ripe.
Vegetables with high water content should be kept in the refrigerator prior to
processing.
TECHNICAL FEATURES
5 cones for different use:
• Fine slicing cone
• Fine shredding cone
• Grating cone
• Slicing cone
• Shredding cone
Power: 150 W
Voltage: 220-240 V, 50-60 Hz
