Owner’s manual
12
EN
BATTERY INSTALLATION
1. Rotate the battery cover lock by 90 degrees to the left until it clicks
into place (fig. 1) and then pull it down (fig. 2).
2. Insert 2x AA alkaline batteries in the battery compartment
following the battery direction indications (fig. 3) as imprinted on
the back of the unit.
3. Close the battery cover by turning it 90 degrees to the right (fig. 4)
until the cover clicks into place and locks (fig.5).
1
2
3
4
5
OPERATION
1. Wash and clean the skin and dry fully.
2. Make sure the appliance is correctly assembled (the batteries
are inserted, protective cover removed, rolling grinding head
placed in its place).
3. Press the safety switch lock, and at the same time push the
switch up (fig. 6).
4. Gently press the appliance against the skin on your foot
(fig.7) for about 2-3 seconds. Do not use excessive strength,
