20
21
2.4G pair
5) The volume of scanner cannot be adjusted.
6) The data cannot be sent to my computer. Why?
a. The connection between TMCT-80 and the
host device will be disrupted when the distance
between the two is beyond valid transmission
range of Bluetooth. Instead, it will be kept in the
buffer of TMCT-80. The data will automatically
upload to your device when back in range.
b. Under Inventory Mode, scanned data will be
kept in the buffer of TMCT-80. To upload data to
computer, please refer to the use of ‘Data Upload
’barcode.
Exit & Save
3) If you want to use multiple scanners in the
same working place under 2.4G mode, you can
set unique channel ID for each scanner to avoid
data interfere. Please kindly contact support@
teemistore.com
for the programming file.
4) Each scanner can only be paired with one
receiver one time. The scanner was paired with
the included USB receiver by factory default.
If not, you can use the barcodes below to pair the
scanner with the receiver. Please kindly use it in
caution.
Enter Setup
