TeeJet SmartPad II, User Manual

Page: 70 / 198

3-16 Chapter 3 - Real-Time Guidance
Data Setup
SmartPad II
Software Version 4.02
Boundary
The Boundary menu item allows you to indicate if you want to Show or create a field boundary. An existing boundary
can be displayed in the background of the guidance view page. Field boundaries can also be created while applying
product to the headland area of a field, see Table 3-7.
To change the Boundary setting; highlight the Boundary menu item and press . The Field Boundary dialog box
will appear. Select the desired setting using the arrow keys , once the desired setting is selected, press to
return back to the Data setup menu, see Figure 3-17.
Figure 3-17: The Boundary Menu Item
Setting Description
Show Displays an existing field boundary in the guidance map page. You will be prompted
for the existing boundary file name.
Create on Right The field boundary will be created based on the position of the right edge of the swath.
The edge of the swath is determined by the swath width. You will be prompted for a
new boundary file name.
Create on Left The field boundary will be created based on the position of the left edge of the swath.
The edge of the swath is determined by the swath width. You will be prompted for a
new boundary file name.
Off No boundary will be created or shown.
Table 3-7: The Boundary Menu Item Settings