TeeJet SmartPad II, User Manual

Page: 44 / 198

2-22 Chapter 2 - Software Overview
Communications Setup
Fieldware for Smartpad II
Software Version 4.02
GPS Receiver
GPS Receiver setup defines DGPS Type Accuracy. GPS Receiver Setup default values are listed in Table 2-9.
To access the GPS Receiver menu page, highlight the Setup menu item in the Main menu page and press . This
takes you to the Setup menu page, see Figure 2-22 (Left side). With in the Setup Menu select the GPS Receiver menu
item using the arrow keys . Press to enter the GPS Receiver menu page. Once in the GPS Receiver menu
page, you can change any of the menu item settings by highlighting the desired menu item and pressing
Figure 2-22: Accessing the GPS Receiver Menu Page
Setting Name Default Value
Change at 1st
Time Start Up
DGPS Type Standard Optional
Table 2-9: GPS Receiver Menu Item Default Settings