TeeJet SmartPad II, User Manual

Page: 156 / 198

4-26 Chapter 4 - Waypoint Navigation
About Nav 2 Point Real-Time Navigation
SmartPad II
Software Version 4.02
Real-Time View Options
There are two real-time view options, North Up and Course on Ground (COG). SmartPad II Versions prior to 4.02
employ the North Up view only. These two view page options are selectable in real-time page, using the appropriate
button located in the button bar in the real-time view page.
North Up View
In the North Up view option, North is always towards the top of the display, see Figure 4 -25.
COG View
In the COG view, the vehicle position (anchor point) is 1/3 up and centered in the width of the view portion of the
real-time page and the ground (map) moves beneath the vehicle. The direction of the vehicle is always to the top of
the view. Figure 4 -26 is the same scenario as in Figure 4 -25, now in the COG view. It shows the vehicle navigating
to Sample Point # 12. In this figure the operator is headed directly towards the point.
Figure 4-25: North Up View
Figure 4-26: COG View