TeeJet SmartPad II, User Manual

Page: 122 / 198

3-68 Chapter 3 - Real-Time Guidance
Mapping Points and Hazards
SmartPad II
Software Version 4.02
Marking a Named Point
The map object Named Point allows you to mark a named point at the vehicle location. A Named Point is the same as
the Point object except that the name of the point is entered when starting guidance. When SmartPad II is setup to
map a Named Point, a point button will be added to the view page button bar, see Figure 3-95. To map a Named Point
drive to the location of the object or feature you want to map, this location should coincide with the location of your
GPS antenna. Next, highlight the Point button in the button bar using the keys and press . Notice that
when you highlight the Point button, the name of the point appears in the information box at the bottom of the view
page.
Figure 3-94: Marked Point in the View Page
Figure 3-95: Mapping a Named Point