USER GUIDE
TEEJET TECHNOLOGIES
98-01569-EN-R1_A4LT-RXA52-UG.docx
2
Installing the Antenna
After a site has been selected, install the antenna as follows:
1.
Mount the antenna on a secure, stable structure using the provided magnetic mounts. A surface mounting plate
(
Part Number
65
-05243) is also available for mounting on non-magnetic surfaces. See Mounting Plate Instructions for details.
2.
Attach the TNC connector of the coaxial cable to the antenna’s TNC connector. Attach the other end of the coaxial cable to the
antenna input port of the receiving device, which must provide power as detailed in the “Specifications” section of this guide. All
TeeJet Technologies GNSS receivers provide the necessary power through their antenna RF connectors.
Figure 1:
Orientation Example
Orient antenna towards the front of the vehicle.
Route cable toward the back of vehicle.
Figure 2:
RXA-52 Dimensions in Millimeters
Front
Back
Mounting
Magnet × 2
M4 × 0.7 Threaded
Insert × 2
TNC Connector
