18
9.3 Adjustment for card dispenser
Adjust the thickness of card
1）Loosen screw counterclockwise and move gate door up and down.
2）
Turn the adjustment screw clockwise to move the door upward.
3）
Put the sample card in the same time adjust the "adjustment screw"
until the card can be out successfully (press the card key test).
4）
Card thickness and adjust the scale and the corresponding table
(this is the reference value, subject to actual).
Card thickness Scale
0.2-0.3 mm
1 scale
0.4-0.5 mm
2 scale
0.6-0.8 mm
3 scale
0.9-1.0 mm
4 scale
5）Tighten the screws
Door
Fixing screw
Adjustment screw
