181-1272-14
Four-Cycle Engine • Vertical Crankshaft • Air-Cooled
Page 15
B. Removing Debris from Engine
Before each use, remove the air cleaner cover. Discard
grass clippings, dirt and debris from the following areas:
• Levers and Linkage
• Cooling Fins
• Air Intake Screen
• Air Inlet
• Guards
Removing debris will insure adequate cooling, correct
engine speed and reduce the risk of fire. See Figure 32.
C. Spark Plug
Check spark plug yearly or every 100 operating hours.
1. Clean area around spark plug.
2. Remove and inspect spark plug.
3. Replace spark plug if porcelain is cracked or if elec-
trodes are:
• Pitted
• Burned
• Fouled with Deposits
4. Check electrode gap with wire feeler gauge and set
gap to—.030 in. (0.76
mm)
if necessary. See Figure 33.
5. Install spark plug and tighten securely.
NOTE
A resistor spark plug must be used for replacement. Contact
your Authorized Tecumseh Servicing Dealer for a
Tecumseh Resistor Spark Plug.
Figure 32. Debris Removal Locations
Figure 33. Resistor Spark Plug
1. Cooling Fins
2. Air Intake Screen
3. Levers and Linkage
4. Spark Plug Connection
1
2
3
1
3
4
2
1. .030 in. (0.76mm) Gap
2. Electrodes
3. Porcelain
1
2
3
Summary of Contents for Power OV195EA
