Tecumseh OHV110 Operator'S Manual Download Page 5

181-1132-14

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

Page 3

II. How to Get Service

For engine adjustments, repairs or warranty service 
NOT covered in this manual, contact your nearest 
Authorized TecumsehPower Servicing Dealer. Find them 
on our website at www.TecumsehPower.com or call 
TecumsehPower Company at 1-800-558-5402 for 
additional information.

A. Engine Identification Decal

A sample engine identification decal is located in the next 
column and indicates the engine’s model number, 
specification and date of manufacture (DOM). See Figure 4.

 NOTES

Please look at the decal on your engine.

Fill in the engine information in the spaces provided for 
future reference. 

The engine identification decal also includes engine life 
specifications for the emissions-related useful life period of 
your engine. This period relates to the emission compliance 
life as certified by EPA and/or CARB. 

• OV models are designated as “C” 250 hours, 

“B” 500 hours and “A” 1000 hours.

B. Technician’s Handbook

If you have a general understanding of internal combustion 
engines and wish to repair and service your engine and/or 
engine emission control systems yourself, a Technician’s 
Handbook is available from your Authorized 
TecumsehPower Servicing Dealer. See Figure 5. This 
handbook covers repairs and adjustments not covered 
within this Operator’s Manual, and it is intended for 
individuals who have had adequate training, experience 
and who practice proper tool usage. Service procedures 
should be clearly understood and practiced when servicing 
TecumsehPower engines. 

• Order as part #695244A or #740043 for OV models. 

TecumsehPower Company manufactures and is 
responsible only for the engine used on this power 
equipment. If repair or service is needed for anything other 
than the engine, contact the service source recommended 
by the equipment manufacturer.

Register Your TecumsehPower Engine
Maintenance Tips
On-Line Store
Locate your nearest TecumsehPower Servicing Dealer

Visit our web site at

www.TecumsehPower.com

LOG ON!

Figure 4. Engine Identification Decal

Figure 5. Technician’s Handbook

TECUMSEHPOWER COMPANY

THIS ENGINE MEETS 1995-2005 CALIF & US EPA 

PHI APPLICABLE EMISSION REGULATIONS FOR SI 

SORE ENGINES

LV195EA

361540D

4TPXS.1951BB

195

04015AA0001

EM

2083

ENGINE
MODEL:

SPEC:

DOM:

Summary of Contents for OHV110

























Reviews: