2.1
TECHNICAL CHARACTERISTICS
• Extruded aluminium casing, anodised for corrosion resistance. Aluminium end
plates coated with epoxy paint
• switch mode technology
• Universal input voltage, that means the charger can operate from any input
voltage between 100 and 245 VAC
• Frequency 50 to 60 Hz
• PFC (Power Factor Correction = 0,98)
• 1 battery output, with internal battery isolator diode
• Universal charging curve, compatible with most of lead acid battery technologies
(open and sealed/maintenance free). U boost = 14,4 V ; U float = 13,6 V
• Working temperature : -10°C to + 55°C
• Forced cooling by fan
• Electronic protection against short circuits
Fuse protections : - Internal : over current at the mains - External : reverse polarity (15A)
• Storage temperature : -20°C to + 65°C
• Humidity : 90%
• Protection index PI32
• Rules : - CEM : EN55022 - class A - User safety : CE, TÜV
• Dimensions : 210 x 85 x 50 mm
• Weight : 1,0 kg
Charging summary :
- The charger is fully automatic, and constantly monitors battery’s state of charge.
- The time taken to complete each charging phase depends on many parameters
(the nominalpower of the charger, the level of discharge, the age of the battery,
the ambient temperature, etc…)
- It is recommended to keep the charger permanently connected to the battery.
COURANT
TENSION
LED VERTE
FLOATING
BOOST
ABSORPTION
CAPACITÉ EN Ah.
5
M i n i - T e c 8 0 3 0 0 0 7 3 - A
Summary of Contents for 80300073-A
Page 16: ......
