manualshive.com logo in svg

Tecsun PL-450, Owner'S Manual

Share
Download
Tecsun PL-450 Owner'S Manual Download Page 12

CLOCK AND ALARM FEATURES 

  continued 

When the alarm activates, it turns on the 

ACTIVATING/DEACTIVATING THE 

radio, with the alarm activation symbol 

ALARM

and the playtime appear flashing in the 

For the alarm to turn on the radio, it must 

display. The radio will play the station 

be activated. The alarm can be 

stored into alarm memory and shut off 

activated/deactivated with the radio on or 

automatically when the playtime counts 

off. To activate the alarm, press/release 

down to 00 or until you turn the radio off 

the ALARM button (11). The alarm symbol 

with the POWER/SLEEP button. The 

will appear in the display. To deactivate 

‘snooze’ feature can also be used (see 

the alarm, press/release the alarm button 

section titled USING THE SNOOZE 

(11). The alarm symbol will disappear 

FEATURE). 

from the display.

There are three methods to set the alarm 

USING THE SNOOZE FEATURE

time. They are almost same as the clock 
set. 

When the alarm activates and turns the 
radio on, the alarm activation symbol (34) 

STORING A RADIO STATION INTO 

appears flashing in the display. While it is 

ALARM MEMORY

flashing, press/release the 

To hear a radio station when the alarm 

SNOOZE/LIGHT button (4). The radio will 

activates, the station must be stored into 

turn off and then turn on again in 10 

alarm memory. Here’s the 2 step 

minutes. This process can be repeated 3 

procedure:

times.
 

1. Turn on the PL-450 and tune to the 
    desired station.
2. Press the ALARM button (11) for more 
    than 1 second, then release. The alarm 
    symbol flashes in the display twice.

NOTE: To monitor the frequencies stored 
into alarm memory, perform a three 
second press of the SYSTEM SET button 
(15) while the radio is turned off. The set 
code information and the frequency 
stored into alarm memory flash in the 
display.

Summary of Contents for PL-450





















Reviews:

No comments

Brands by name

Popular brands

Load more brands