Ph: +61 2 9939 4377
www.tecsunradios.com.au
Ph: +61 2 9939 4377
www.tecsunradios.com.au
TECSUN RADIOS AUSTRALIA
24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: [email protected]
www.tecsunradios.com.au
4
LCD DISPLAY
Battery consumption indicator /
Charging indicator
1
2
Sleep timer indicator
3
Alarm on/off indicator
6
Signal indicators
dBu: signal strength unit
dB : Signal to Noise Ratio
(S/N) unit
7
8
SW meter band indicator
9
ETM indicator
4
Temperature (Temp.)
5
10
11
kHz: frequency unit for
MW& SW
MHz: frequency unit for FM
15
Key-lock indicator
12
14
Digital number display
With radio off: local time
With radio on: frequency display,
band display
FM stereo status indicator
16
Band indicator
Alarm time indicator
Preset memory address
13
Rechargeable batteries indicator
1 2 3 4
5
6
7
8
9
10
14
15
16
13
SLEEP
Temp.
12
11
17
USING THE INTELLIGENT CHARGING FUNCTION
Connect USB 5V to external
power sources
In power off mode, install 3 x UM3 (AA size) rechargeable
(Ni-MH) batteries. Press & hold the [ ] button until
“ " and the "Ni-MH Battery" symbol appear on the
display.
1. Use any 5V external adaptor with USB plug to connect
this radio, the symbol " " will advance from the bottom
to top during power charging. It stops when batteries are
fully charged.
2. You can also use any USB cable
to connect the radio with your PC
for charging.
Notes for charging power:
Do not mix new and used batteries, or batteries of different
charging capacity.
Caution:
Do not attempt to charge non-rechargeable
batteries, this will damage both the device and the batteries.
Digital number display (4 Digits)
With radio off: local time, alarm
time, temperature
With radio on: local time, signal
strength / SNR, alarm time,
temperature, memory address,
meter band, SSB fine tuning
frequency.
