SLEEP FUNCTION
With sleep function, you can adjust the length of time for
the radio to turn off automatically.
The default setting for the auto-turn off time is 30 minutes if
the radio being turned on by short pressing the [POWER]
button.
To change the sleep timer, long press the [POWER] button
with [ON / 01~120] & [SLEEP] appear on the display, rotate
the [TUNING] knob to select sleep timer from 1 ~ 120
minutes or permanently " " Wait for 3 seconds until
" " symbol stops flashing to confirm.
Note:
Short press the [POWER] button to directly turn on
the radio with previous preset sleep timer; long press it to
change the timer.
flashing
11
Delete all memories
Method 2:
Method 3:
SEMI AUTO-DELETE MEMORY
In VM mode, long press the [VM] button to activate the
Auto-Browse function of memory. Once previewing your
unwanted station, simply press the [DEL.] button with
" " shows for 2 seconds and then keep on browsing
other stations. To stop the browsing function, short press
the [VM] button to exist.
DELETE ALL MEMORY
Short press the [VM] button to
enter VM / Memory mode, long
press the [DEL.] button for
3 seconds with " " shows on
the upper right corner of the
display, press again the
[DEL.] button to remove all
memory.
Note:
If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
SLEEP
SLEEP
10
Method 2:
MANUALLY STORING STATION
1. Tune to your desired station, press the [MEM.] button
once and notice the PRESET number flashing in the
upper right corner of the display.
2. While it flashing, press the [MEM.] button to store it into
the memory or wait for 3 seconds to store it automatically.
If you want to store it into another PRESET memory, just
rotate the tuning knob of your choice, and press the [M]
button to confirm.
Method 3:
SEMI-AUTO STORING STATION
1. Short press the [VF] button to enter frequency status.
2. Long press [VF] button to activate the Auto-browse
function.
3. While tuning to your favor station, you can direct store it
into the next available memory by pressing on the [MEM.]
button with PRESET flashing. The Auto frequency
browsing keeps on going unless you short press the [VF]
button again.
DELETE MEMORY
Method 1:
MANUAL DELETE MEMORY
1. Turn on the radio and press the [VM] button causing
PRESET stations appears in the display's upper right
corner.
2. Rotate the [TUNING] knob to select the memory that you
want to delete.
3. Long press [DEL.] button with " " flashing in the
display, press the [DEL.] button again to confirm.
Note:
If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
PL-360