7
TROUBSHOOTING
Issue
Cause
Solution
The mic does not
sync with the
Receiver
The mic lost pairing
with the Receiver
Pair the mic and Receiver manually
following the steps below
1. Turn on the hand held microphone
that is not paired to the Receiver,
hold and press the power button and
the frequency adjustment button
until the LCD display of the
microphone flashes;
2. Turn on the Receiver when the LCD
display of the hand held microphone
flashes, you will see the RF indicator
flashes briefly.
3. Turn off the hand held microphone
and turn it back on. The mic and
Receiver are connected.
4. Short press the frequency button
in the hand held microphone to select
an appropriate frequency. The
Receiver will auto sync with this
microphone at this selected
frequency.
Mic volume is low
This wireless mic
system does not
support portable
Bluetooth speaker
Please make sure the speaker has mic
input and mic volume control.
Recommend to use speakers over 15W
or other audio device such as audio
mixer, amplifiers and speakers like ION
Bluetooth speakers or singing machines
or Hotec PA speaker.
Can this be used
with Android/iOS
smart phones or
DSLR cameras for
recording?
Yes, please make sure to use the correct
TS to TRRS cable or TS to TRS cable.
Contact Hotec seller support if you have
difficult connecting it with your phone or
camera.
Can I sync the
microphone for
H-U26 with the
Receiver of H-U06
since my Receiver
for H-U26 is
broken?
No. Please contact the seller for
replacement if the product is within
warranty.
