TECshow Quatrobeam Move, User Manual

Page: 5 / 22

QUATROBEAM MOVE
1. Auto running
When the display shows “AUTO”, the light will run as the
program which had been set. Press “ SETUP ” button to
enter into the optional menu. Press “UP” and DOWN” to
choose the optional which need to set the parameter as
below: Led, Pan or Tilt.
•
LED function
1.
When choose “
Led
”, and press “
SETUP
”
enter to LED auto running parameter setting.
The option with black marks is selected. You
could choose “
Auto ”, “ Color ” or “ Dimmer ”.
When choose “
Auto
”, press “
SETUP
” button
enter to setup menu.
Press “
UP ” and “ DOWN ” to select the param-
eter. When choose “Speed”, press “ SETUP ” to
choose the speed menu of the auto running.
Press “
UP ” and “ DOWN ” to adjust the auto
running speed from 01-20.
When choose “
Freq.” , press “ SETUP ” to set
the flash speed.
Press “
UP ” and “ DOWN ” to adjust the flash
speed 00-20Hz.
2. When choose “ Color” , press the “ SETUP ”
to set the parameter. Choose “Static” and
press “
SETUP
” again to enter color program.
Press “ UP ” and “ DOWN” to choose relative
color.
3. When choose “ Dimmer” , press the “ SET-
UP
” to set the parameter. When choose
“RED”, “GREEN”, “BLUE” or “WHITE” ,
press “ SETUP” to enter relative gray level:
0-255. When choose “Freq. ”, press “ UP ” and
“DOWN”
to set the flash speed 00-20Hz.
•
Pan function
•
When choose “Pan”, press “ SETUP ”
enter the functzion choose menu.
Pan has 4 modes,
p-Auto, p-Manul, p-CW and
p-CCW.
1. When choose “p-Auto”, pan enters to
build-in program.
2.
When choose “
p-Manul”
, pan stops in set-
ting location. Press “ SETUP” enters to set pan
location. Press “ UP ” and “ DOWN” to adjust
the location: 0—540 degrees.
3. When choose “ p-CW ”, Pan turns with
clockwise direction (from the LED light). Press
“
SETUP” , enter to set Pan speed setting.
Press “ UP” and “ DOWN ” to adjust the speed:
1-16.
4.
When choose
“p-CCW”
, Pan turns with
anti-clockwise direction (from the LED light).
Press “
SETUP”, enter to set Pan speed set-
ting. Press “UP ” and “ DOWN” to adjust the
speed: 1-16.
•
Tilt function
1. When choose “Tilt”, press “SETUP” enter
the function choose menu.
2. Pan has 2 modes, t-Auto and p-Manul.
3. When choose “t-Auto”, Tilt enters to
build-in program.
4. When choose “t-Manul” , Tilt stops in set-
ting location. Press “ SETUP ” enters to set tilt
location. Press “ UP” and “DOWN ” to adjust
the location: 0—200 degrees.
2. Build-in program
When display shows ”SHOW”, it enter to the build-in
program.
Press “
SETUP” to enter the build-in programs. There are
9 programs inside. Press “UP” and “ DOWN” to choose
the built-in program from Show1 –Show9 (the built-in
program is pre-set and can’t be reset).
3. Sound-active Mode
When display shows “SOUND” , enter the sound-active
mode.
ENGLISH VERSION
P. 5