
P. 4
Nebula Tri |
2. SAFETY INTRODUCTIONS
English version
•
Please keep this User Guide for future consulta
-
tion. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
•
All fixtures are intact from the manufacturer,
please operate follow up the user manual, arti
-
ficial fault are not under guarantee repair.
•
Unpack and check carefully that there is no
transportation damage before using the unit.
•
The unit is for indoor use only. Use only in a dry
location.
•
Do install and operate by operator.
•
Use safety chain when fixes the unit. Don’t han
-
dle the unit by taking its head only, but always
by taking its base.
•
The unit must be installed in a location with ad
-
equate ventilation, at least 50cm from adjacent
surfaces.
•
Be sure that no ventilation slots are blocked,
otherwise the unit will be overheated.
•
Before operating, ensure that the voltage and
frequency of power supply match the power
requirements of the unit.
•
It’s important to ground the yellow/green con
-
ductor to earth in order to avoid electric shock.
•
Maximum ambient temperature TA : 40°. Don’t
operate it where the temperature is higher than
this.
•
Don’t connect the device to any dimmer pack.
•
First run, there will be smoke or smells, and all
disappearing a few minutes later.
•
Make sure there are no flammable materials
close to the unit while operating, as it is fire
hazard.
•
Look over power wires carefully, replace im
-
mediately if there is any damage.
•
Never run on for a long time lest shortening
lifespan. Avoid any inflammable liquids, water
or metal objects entering the unit.
•
Once it happen, cut off the mains power imme
-
diately.
•
Do not operate in dirty and dusty environ
-
ment, also cleaning fixtures regularly.
•
Do not allow children to operate the fixture.
•
Do not touch any wire during operation as
there might be a hazard of electric shock.
•
Avoid power wires together around other
cables.
•
Disconnect mains power before fuse/lamp
replacement or servicing.
•
Replace fuse only with the same type.
•
In the event of serious operating problem,
stop using the unit immediately.
•
Never turn on and off the unit time after time.
•
The housing, the lenses, or the ultraviolet filter
must be replaced if they are visibly damaged.
•
Do not open the unit as there are no user ser
-
viceable parts inside.
•
Never try to repair the unit by yourself. Re
-
pairs carried out by unskilled people can lead
to damage or malfunction. Please contact
the nearest authorized technical assistance
center.
•
Disconnect the mains power if the fixture is
not used for a long time.
•
Do use original packing materials once trans
-
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
WARNING!