DMX Mode
Select the Addr menu, press the ENTER key to confirm. Then
use the initial address code DOWN/UP button to set this light
(A001 ~ A512). Once you have set your initial address code,
press ENTER to define and save. Not to make any changes,
wait a minute to automatically exit the menu and save. The
main menu, please press the MENU button
Channel selection mode
Select the Chnd menu, press the ENTER key to determine.
To use the DOWN/UP button to channel mode: 5Ch (5 Chan
-
nel).9Ch (9 Channels) mode. Select the desired channel
mode, press ENTER to determine and save. Not to make any
changes, wait a minute to automatically exit the menu and
save. The main menu, please press the MENU button
Master/Slave mode
Select the SLnd menu, press the ENTER key to confirm. To
use the DOWN/UP key set of Master-Slave mode need: NASt
(Master). SL 1 (Slave 1). SL 2 (Slave 2) mode. Select the desired
mode, press ENTER to determine and save. Not to make any
changes, wait a minute to automatically exit the menu and
save. The main menu, please press the MENU button
Performance mode
Select the Shnd menu, press the ENTER key to determine. To
use the DOWN/UP button to Performance mode: SoUo (Sound).
CoLo (color).StCo (Strobe).Fade (Gradient) mode. Select the de
-
sired mode, press ENTER to determine and save. Not to make
any changes, wait a minute to automatically exit the menu and
save. The main menu, please press the MENU button CoLo (col
-
or) Co1 ~ Co12 12 program mode, use the DOWN/UP button to
select the desired mode, press ENTER to determine and save.
Not to make any changes, wait a minute to automatically exit
the menu and save. The main menu, please press the MENU
button StCo (STROBE) have 0 ~ 255 to adjust the speed, use the
DOWN/UP button to select the desired speed, according to EN
-
TER, determine and save. Not to make any changes, wait a min
-
ute to automatically exit the menu and save. The main menu,
please press the MENU button Fade (Gradient) SP1 ~ SP8 8 fade
speed selection, use the DOWN/UP button to select the gradient
speed required, according to ENTER, determine and save. Not
to make any changes, wait a minute to automatically exit the
menu and save. The main menu, please press the MENU button
Backlight mode
Select the LED menu, press the ENTER key to determine.
Then use the DOWN/UP button to set the backlight mode: ON
(Open).OFF (Close). Select the desired mode, press ENTER to
determine and save. Not to make any changes, wait a minute
to automatically exit the menu and save. The main menu,
please press the MENU button
White balance
Select de BALA menu, press the ENTER key to determine. To
use the DOWN/UP to display mode: Red (red), Gree green),
Blue (blue), select the desired mode and press enter to de
-
termine and save. Not to make any changes, wait a moment
to automatically exit the menu and save. The main menu,
please press the MENU button Red (red) with 125-255 using
the DOWN/UP button for brightness. Press ENTER to define
and save. Not to make any changes, wait a minute to auto
-
matically exit the menu and save. The main menu, please
press the MENU button Gree (green) with 125-255 using the
DOWN/UP button for brightness. Press ENTER to define and
save. Not to make any changes, wait a minute to automati
-
cally exit the menu and save.
Show positive and negative direction
Select the dISP menu, press the ENTER key to determine. To
use the DOWN/UP button to display mode: dISP (positive).
DSIP (reverse). Select the desired mode, press ENTER to de
-
termine and save. Not to make any changes, wait a minute
to automatically exit the menu and save. The main menu,
please press the MENU button
Auto-test
Select the Test menu, press the ENTER key to determine. The
machine will start automatically detect color. Not to make
any changes, wait a minute to automatically exit the menu
and save. The main menu, please press the MENU button
Fhrs
Select the Fhrs menu, press the ENTER key to determine. You
can see the use of machine time / h. Not to make any chang
-
es, wait a minute to automatically exit the menu and save.
The main menu, please press the MENU button
Temperature
Select the Tenp menu, press the ENTER key to determine. You
can see the machine light board temperature / degree. Not
to make any changes, wait a minute to automatically exit the
menu and save. The main menu, please press the MENU button
p. 6
NEBULA 1 - 36x1 W LED PAR LIGHT
English Version
Summary of Contents for nebula 1
Page 25: ...tecshow amproweb com...
