P. 4
Tecshow Navigator Node POE |
English version
3. POWER OVER ETHERNET
4. WEB SERVER
5. IP ADDRESS
This product can receive power through the
ethernet.
The Navigator Node POE Web Server can be ac-
cessed by any computer no the same network as
the product. It allows network port. The firmware
version such as the IP address and name of the
product, and the individual settings for each DMX
port. The firmware version of product can also be
viewed through the Web Server. To access the Web
Server:
1. Connect The Navigator Node POE to computer
via the ethernet port on the back of the product.
The IP address for the Navigator Node POE can be
changed though the Web Server, by clearing the IP
Address field and the new IP Address. Click Apply to
confirm changes.
•
After the IP address is changed, the Web Server
must be reaccessed at the new IP address.
• Art-Net™ function is limited to IP addresses
beginning with 2 or 10. If the First digit of the IP
2. On the computer, set the IP address of the
network to have the same first digit as the IP
address of the product. The default IP address
of each Navigator Node POE is 2.0.0.1.
3. Enter the IP address of the product into the URL
bar of a web browser application.
4. Press the Enter key.
address of the Navigator Node POE is changed,
the computer´s, Network setting must be
changed to match before the Web Server can
be accessed again.
Observation:
Design and product specifications are subject to change without prior notice.
