P. 9
| Tecshow Navigator 3
8. DMX OPERATOR
PLAYBACK SCENES & CHASES
Manual run scenes
1.
When power is first turned on, the unit is in the
Manual Scene Mode.
2. Make sure
AUTO & MUSIC BUTTON LED’S
(8 &
9) are OFF.
3. Select the desired BANK using the
UP and
DOWN BANK BUTTONS (4)
, that store the
scenes you wish to run.
4. Press the
SCENE BUTTONS (2)
to run the scene
you selected.
8. Press and release the
TAP SYNC/DISPLAY BUT-
TON (11)
to return to normal operation.
Delete a Step
1. Press the
PROGRAM BUTTON (6)
for three
seconds to activate the Program Mode. The
LCD DISPLAY (3)
will indicate program mode
by displaying a continuous flashing light next to
PROG.
2. Select the
CHASE BUTTON 1 TO 6 (5)
that con-
tains the step you would like to delete.
3. Press and release the
TAP SYNC/DISPLAY BUT-
TON (11)
.
4.
After selecting the
TAP SYNC/DISPLAY BUT-
TON (11)
use the UP and DOWN BUTTONS, to
manually scroll to the step you wish to delete.
5. When you have reached the step you wish to
delete, press and release the
AUTO/DEL BUT-
TON (8)
.
Delete a complete chase
1. Press the
PROGRAM BUTTON (6)
for three
seconds to activate the Program Mode. The
Manual run chases
This function will allow you to manually step
through all scenes in any Chase.
1. Press the
PROGRAM BUTTON (6)
for three
seconds to activate the Program Mode. The
CD DISPLAY (3)
will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Execute a chase by selecting a
CHASE BUTTON
1 TO 6 (5)
.
3. Press the
TAP SYNC BUTTON (11)
.
4. Use the
BANK BUTTONS (4)
to scroll through
the chase.
LCD DISPLAY (3)
will indicate program mode
by displaying a continuous flashing light next to
PROG.
2. Press and hold down the
AUTO/DEL BUTTON
(8)
.
3. While holding down the
AUTO/DEL BUTTON (8)
press the
CHASE BUTTON 1 TO 6
that you want
to delete twice. The chase should be deleted.
4. Release the
CHASE BUTTON (5)
. The chase
should be deleted.
Delete all chases
This function will allow you to clear all chase mem-
ory (delete all chases).
1. Press and hold down the
AUTO/DEL (8)
and
BANKDOWN (4) BUTTONS
.
2. While holding down the
AUTO/DEL (8)
and
BANKDOWN (4) BUTTONS
disconnect the
power.
3. Holding down the
AUTO/DEL (8)
and
BANK-
DOWN BUTTONS (4)
reconnect the power and
hold for 3 seconds until the LED´s blink which
indicates all chase memory should be erased.
English version
